Polyurethane Foam Spray Gun AB Two-component for DN-999 1:1 Injection Pump

Polyurethane Foam Spray Gun AB Two-component High Pressure Coating Spray Gun Kit polyurethane or polyurea Sprayer(2L/Min, 10000psi) for DN-999 1:1 Injection Pump – Polyurethane/Polyurea/Insulation/Coating/Waterproofing/Expansion Joint

Adoration-A50 Portable Slab Lifting Pump Machine 1:1 Polyurethane

Compact & Lightweight — Easy to move and operate with low failure rate for consistent performance. Pneumatic Directional Control — Simple, stable design works reliably even without electricity, extending electrical parts’ lifespan by 50%. Precise Temperature Control — Imported sensors and multi-cylinder heating ensure faster, uniform heating, boosting efficiency and lowering raw material costs. User-Friendly Panel — Intuitive operation for full machine control and ease of use. Reliable & Safe — New pressurization system ensures fixed output ratios and higher yield; equipped with overheating protection and premium imported parts. Includes 1-year warranty and lifetime maintenance.

S-10 (1/2" x 3.5") Stainless Steel Injection Packer

The S-10 Instant Packer is a contractor-grade injection accessory specifically engineered to drastically enhance on-site productivity by eliminating the traditional curing delay. These packers are designed for Tool-Free Removal: once resin injection is completed, they can be immediately knocked off using just a hammer—no waiting time or specialized tools required. This crucial feature allows crews to move instantly to the next injection point, significantly minimizing downtime and improving workflow efficiency in time-sensitive structural repair applications.

S-15 (1/2" x 5") Stainless Steel Injection Packer

The S-15 Instant Packer is a contractor-grade injection accessory specifically engineered to drastically enhance on-site productivity by eliminating the traditional curing delay. These packers are designed for Tool-Free Removal: once resin injection is completed, they can be immediately knocked off using just a hammer—no waiting time or specialized tools required. This crucial feature allows crews to move instantly to the next injection point, significantly minimizing downtime and improving workflow efficiency in time-sensitive structural repair applications.

B-10S (3/8" x 4") Aluminum Injection Packer

The B-10S (3/8" x 4") Aluminum Injection Packer features a key Single Rubber Seal design, specifically engineered for efficient resin injection in concrete restoration and professional soil stabilization projects. Combining a lightweight, cost-effective aluminum body with reliable sealing, the B-10S is suitable for demanding high-pressure grouting applications. It is a preferred choice for injecting a wide range of materials, including polyurethane, epoxy, or acrylate resins, ensuring consistent performance when sealing cracks or filling voids in structures.

B-8 (3/8" x 3.1") Aluminum Injection Packer

The B-8 (3/8'' x 3.1'') Aluminum Injection Packers are designed for efficient injection of resins into cracks or voids, making them a reliable choice for concrete repair and soil stabilization applications. Suitable for use with polyurethane, epoxy, and acrylate grouting materials, these packers support high-pressure injection tasks with consistent performance. With a lightweight aluminum body and practical size, they are easy to install and remove, providing a cost-effective solution for professional concrete restoration and structural injection projects.

A-10 (1/2" x 3.6") Aluminum Injection Packer

The A-10 (1/2" x 3.6") Aluminum Injection Packers are engineered for high-pressure injection of polyurethane, epoxy, and acrylate resins into cracks, joints, or voids. Widely used in concrete restoration and soil stabilization projects, these 1/2-inch diameter packers combine a lightweight aluminum body with dependable sealing performance. Designed to withstand significant grouting force, they provide a cost-effective and professional solution for reliable leakage control and structural repair.

A-15 (1/2" x 5") Aluminum Injection Packer

The A-15 (1/2" x 5") Aluminum Injection Packers are engineered for high-pressure injection of polyurethane, epoxy, and acrylate resins into cracks, joints, or voids. Optimized for concrete repair, crack repair, and soil stabilization projects, these 1/2-inch diameter packers feature a lightweight aluminum body that ensures dependable sealing and professional waterproofing under intense pressure. The extended 5" length makes them especially suitable for deep-reach structural grouting and leakage control, providing a reliable solution for effective material delivery in complex infrastructure maintenance and sealing applications.

A-20 (1/2" x 5.5") Aluminum Injection Packer

The A-20 (1/2" x 5.5") Aluminum Injection Packers are ideal for injecting resins into cracks or voids and are commonly used in concrete restoration and soil stabilization projects. Engineered for high-pressure grouting with polyurethane, epoxy, or acrylate materials, these packers feature a durable aluminum body that ensures both reliability and ease of use. Supplied in 100 pcs per bag, they offer a lightweight, cost-effective solution for efficient and professional injection work.

Surface Packer

Surface packers are filling valves, also known as injection ports, installed directly on the surface cracks of a structure. The injection packer base features a supporting plate to ensure optimum adhesion. Adoration Injection Packers are designed for injection applications where drilling holes is not possible or not allowed.

Copper Injection Packer (Ø8 x 55mm)

• High-Pressure Injection: Reliable for concrete crack repair, waterproofing, and structural reinforcement. • Strong Rubber Seal: Expands to Ø10.2 mm, withstands 380 kgf/cm² pressure. • Precision Size: Ø8×55 mm, ideal for concrete ≤30 cm thick. • Easy to Use: Quick installation and removal, compatible with most injection pumps. • Affordable & Cost-Effective: Copper body with high-quality rubber, built for value.

SV-999 Dual Injection Pump

The Adoration SV-999 Injection Pump is a Contractor Grade grouting machine ideal for daily concrete repair and foundation sealing. Delivering over 5000 PSI, it handles high-pressure waterproofing and specialized crack repair. Features relief valve, vertical wand, and compatibility with diverse polyurethane and epoxy materials 10 to 1000 cps. This lightweight unit is durable and easy to maintain.

Cordless SG-999 Grouting Machine

The Adoration SG-999 Cordless Injection Pump is a Job-Site Ready solution specially designed to integrate with Dewalt 20V batteries (compatible with models DCB200, DCB201, etc.), delivering reliable and flexible operation without the constraint of cords. This Portable Grouting Machine is essential for remote waterproofing and access to difficult areas. (Please note: The pump is sold as the unit only; batteries are not included. For maximum battery life, always detach the pump when idle to prevent drainage.)

B-10 (3/8" x 4") Aluminum Injection Packer

The B-10 (3/8" x 4") Aluminum Injection Packers are designed for the efficient injection of polyurethane, epoxy, and acrylate resins into cracks, joints, or voids. Ideal for concrete restoration and soil stabilization, these 4-inch packers feature a lightweight aluminum body for easy installation and removal. With dependable sealing and broad compatibility with chemical grouting materials, they provide a cost-efficient solution for professional leakage control and structural repair projects requiring accurate material delivery.

DN-999 (L) Dual Injection Pump: 2:1 Grouting Pump

The Adoration DN-999(L) Dual Injection Pump is a compact, lightweight 2:1 Grouting Machine perfect for specialized two-component Epoxy or Polyurethane applications. This Professional Series pump is essential for slab lifting, concrete repair, and foundation stabilization. Featuring a modular design with stand, gauge, hose, and dual hoppers, the drill-operated system ensures superior flow control and simple maintenance for efficient structural repair tasks..

Hammer-In 5/8” Button Head Plastic Injection Packer – EZ Flow Model

The 5/8-inch Adoration Plastic Button Head Packer is a versatile port featuring an integrated button head that can be easily converted to a zerk-style port with an Adoration zerk fitting. Its EZ Flow design offers a large internal diameter for maximum product flow, with a built-in ball valve in the shaft. Ideal for high-volume tasks like curtain injection and slab lifting, this durable plastic packer can be hammered or screwed into place.

SU-999 Grouting Pump

The Adoration SU-999 Injection Pump is a Contractor Grade unit delivering over 5000 PSI for advanced foundation sealing. Ideal for high-pressure leak repair and structural grouting. Compatible with polyurethane and epoxy. Main Dual Gearbox Assembly: Contractor Grade heavy-duty component. High-Pressure Gauges: (2 Pcs) Essential for precise grouting control. Injection Hoses: (2 x 5M) Extended reach for waterproofing projects. Material Hoppers: (2 Pcs) Ready for polyurethane and epoxy injection. Comprehensive Spare Kit: Minimizes downtime on crack repair jobs. Heavy-Duty Drill Motor: Ensures sustained high-pressure operation. 50 A-10 Injection Packers: Bulk Quantity for immediate leak repair and plumbing sealing.

City Gas Supplying CY620-IPC G4 IC Card Smart Prepaid Diaphragm Gas Meter

Y620-IPC G4 IC Card Smart Prepaid Diaphragm GasMeter Blank Card for CY620-IPC G4 Card Reader for CY620-IPC G4

Transfer Pump

Plastic Packer for Slab Lifiting